Iqoya X/Link/Le Front Panel; Leds - Digigram IQOYA X/LINK Series User Manual

<SIP address or RTP listening port>
Ok key leads to submenu (1)
(***) Items not available during a communication.
(****) Depending on whether the contact is accessible via SIP or Symmetric RTP

4.2. IQOYA X/LINK/LE front Panel

4.2.1. LEDs

PSU1
PSU2
Power
Send
Receive
System
Fail-over
SD
Ok key leads to submenu (4)
LAST MESSAGE
<Message following a call
failure>
CONTACT NAME
<Contact name of this
codec>
REGISTRATION NAME
<SIP address of this codec>
Status of the first internal power supply unit. Blue if PSU is ok. Off for PSU failure.
Status of the second internal power supply unit. Blue if PSU is ok. Off for PSU failure.
Green if internal power is ok
Green: Send activity is normal.
Red: at least one active sender has a failure
Green: Receive activity is normal
Red: at least one active receiver has no audio source
Green flashing if unit is ok.
Green in case at least one output program has switched to a backup audio source
Flashes when SDHC card is accessed
IQOYA X/LINK range user manual
<SIP address or <SIP address or
IP address (****)> IP address (****)>
16