System Menu; Properties; Alarms Setup - Digigram IQOYA CALL Series User Manual

2.5. System Menu
The System settings are available and configurable through the Preferences / System Menu
2.5.1. Properties
This page gives you access to the unit serial number, current firmware version, supported options (as Enhanced
apt­X audio format ­ option available only on IQOYA *CALL) and hardware platform ID.
Hostname, Device Name and Date can be set by the user using the Configure button.
2.5.2. Alarms setup
Each alarm occurring on the IQOYA can be written in a log file, sent as an SNMP TRAP, and sent to a GPO.
● Click on "Configure" to be able to modify the alarms setup.
For each alarm :
● Select "Yes" in the "Log" column if you want to get a trace of the alarm in the log file.
Select "Yes" in the " ​ S end By Trap
●
Select a GPO number from the list in the "S ​ e nd By GPO#
●
occurs. Warning: Selection of the GPO for an alarm is exclusive of the selection of the GPO for tunneling in
the receiver (if function available).
​
" column if you want a SNMP supervisor to receive a TRAP for the alarm.
I QOYA *CALL - IQOYA *CALL/LE
​
​
" column so that the GPO is set when the alarm
User Manual v0.99
43 / 77