Multi-Line (Ml) Appearances - Panasonic DBS 824 Manual

Key Telephone Features

Multi-Line (ML) Appearances

(CPC-S and CPC-M)
Description
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key.
See "ML/MCO Separation" (page 3-54) for information on assigning both
ML and MCO keys to the same system.
Operation
Operation
To originate an intercom or trunk call
To place a call on Exclusive Hold (page 3-29)
To place a call on System Hold (page 3-15)
To transfer a call
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group "9"
• FF2 (Trunks): Pooled Trunk Access for Group "81-86"
• FF3 (Extension): Forced Least Cost Routing
• FF5 (Keys): FF Key Assignment (all)
• FF8 (LCR): LCR Settings (all)
Considerations
• A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall
• When a CO call or an Intercom Call arrives, a search begins for a Multi-
Revised April 2000
calls, and call-forward calls.
Line key not in use. The lower numbered FF keys will be searched first.
When a free Multi-Line key is found, the LED flashes green and the
extension rings.
DBS 824-3.0/3.2-700
Line Appearances
Action
Press an idle MCO key. The key blinks
(green) as the call is made.
Press the MCO key.
Press the HOLD key.
Press HOLD, dial the destination exten-
sion, then press PROG.
3-53