Multi-Co (Mco) Appearances - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation
Operation
To originate a trunk call...
To place a call on Exclusive Trunk Hold (page 133)...
To place a call on System Trunk Hold (page 133)...
To transfer a call...
Hardware Requirements
• N/A
Related Programming
• FF4: Key Assignment
Considerations
• N/A

Multi-CO (MCO) Appearances

Description
You can make and receive CO line calls using a Multi-CO (MCO) key. Each extension can have up to
5 MCO keys.
An MCO key can be assigned to any of the pooled trunk groups. Pressing the MCO key is the same as
dialing the MCO Access Code (usually 9, 81-84).
Operation
To originate a trunk call
To receive a call on an MCO key.
To place a call on Exclusive Trunk Hold
576-50-700
Operation
Operation
DBS 576HD (USA) issued September 2001
1. Press an idle DL key.
2. The key blinks green as the call is made.
1. Press the DL key.
1. Press the HOLD key.
1. Press the HOLD key.
2. Dial the destination extension.
3. Press the PROG key.
Action
1. Press an idle MCO key.
The key blinks (green) as the call is made.
1. If ringing line preference is enabled, go off-
hook.
If ringing line preference is not enabled, go
off-hook and press the MCO key with the
green flashing LED.
The LED lights solid green.
1. Press the MCO key.
The key flashes green while the call is held.
Chapter 7. SLT Features
Action
5-59