Telemetry: Receiver [Ext. battery]
The EXT-VOLT screen will display the data from
In order to use this function, it is necessary to
voltage of
the
EXT-battery.
Max. and min. values
since the power
was turned ON will
display.
↓ The "down" arrow
will indicate that an
alarm will sound when
the voltage drops to
below the setting.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
Alarm set
*When the screen is tapped for one second, the rate is reset
to the initial value.
*CA-RVIN-700 must be installed in the aircraft.
You will be alerted by an alarm or vibration if
*Only receiver voltage and EXT voltage can be used in
functions.
t
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
Ext. battery
voltage
Sets the voltage on
which the alarm
operates.
"Vibrator" type
< Linkage menu >
97