Idle down
The Idle down function lowers the engine's idle
The action is not functional at high throttle to avoid
direction must be chosen, as it defaults to " −− " .
T h i s i s t h e i d l e d o w n
throttle position. Tapping
this will display value input
buttons on-screen. Set the
engine's max. low position.
Range:
(↑)-100 〜 +100(↓)
Pressing and holding a
value will reset it to 0.
Idle down setting procedure
< Linkage menu >
82
Tapping this will pull up the
hardware selection screen.
Select the idle down switch
and ON-OFF direction.
Offset rate
Tapping this will change
INH to either OFF or ON
and activated.
This is the current position bar for the
throttle stick. Throttle cut will only
function when the throttle stick is more
than halfway into the low throttle range.
Landing
Idling, lower