Gyro [Helicopter]
This function is used to adjust gyro sensitivity.
The sensitivity and operation mode (Normal mode/
AVCS mode) can be set for each condition.
The gyro sensitivity can be switched with each
condition or the switch. (3 sensitivities)
*Compatible with 3 axis gyro (CGY750).
The operation mode
( A V C S / N O R ) a n d
sensitivity of the 3
a x e s G y r o / G y r o 2 /
Gyro3 can be set.
Use this when you want
to adjust sensitivity via
VR, etc., and not on-
screen data entry. Tap "--
", select "VR", etc., and
then tap the value to
adjust. (Won't operate
when value is "0".)
Setting method
166
< Model Menu (Helicopter Functions) >
Gyro(RUD)
Gyro2(AIL)
setting
setting
When using Rate2/Rate3, make it
INH → ON or OFF.
CH6
CH5
CH9
CH10
Gyro3(ELE)
setting
Tapping these will
pull up the detailed
selection screen for
each.
Rate1 Gyro type and
gain
Rate2 Gyro type and
gain
Rate3 Gyro type and
gain
Condition group/
single mode selection
(Gr. /Sngl)
The ON/OFF switch
of gyro is chosen.
3 rate (gyro gain)
adjustment