FUTABA 16SZ Instruction Manual page 178

When shifting the ON/OFF point
The ON/OFF and hysteresis (dead band) boundary point (there
are 2 points: top and bottom) position can be shifted. ON/OFF is
possible at a free position.
[ Setting method ]
and touch the [ON/OFF]
Current stick position
[ Setting method] → Box Type
Hysteresis ： Hysteresis (dead band) can be set to ON and OFF
[Setting method] → Linear Type
◆ Area Green：ON
◆ Area Red：OFF
◆ Area Yellow：Hysteresis (Dead band)
Reverse of ON/
OFF direction
● Symmetry
same time, Lower
● Symmetry
set, at the same time,
＜ Data ＞
179