FUTABA 16SZ Instruction Manual page 68

Model name change
Current model (green)
is chosen (blue).
When you are done
renaming, tap Model name.
Completion of rename
WARNING
Never launch the Model Selection function
while the engine is starting or the motor drive
wiring is connected.
■Careless spinning of propellers or rotors is
extremely dangerous.
WARNING
Carefully check that the aircraft to be used and
the model selected match up.
■Using a model which does not match the aircraft
runs the risk of the aircraft flying out of control
and crashing. Perform a careful operations check
prior to flight.
Model copy
Current model (green)
is chosen (blue).
add new copied model
*If there is no model with the same name in the copy
destination, the name of the copied model is saved. If there
is a model of the same name, a number is added at the end
of the model name and the model is copied. You can change
the name later.
*Indication date : When the model data is copied, the creation
date for the current model is recorded.
＜ Linkage menu ＞
69