Camber mixing
This function adjusts the rate of camber
operation which operates the wing camber
(ailerons, camber flaps, brake flaps) in the
negative and positive directions. The aileron,
flap, and elevator rates can also be adjusted
independently by curve, and attitude changes
caused by camber operation can be corrected.
*Initial setting assigns camber operation to side lever LS.
menu and call the setup screen
shown below.
Activate the function by
tapping the [INH].
Condition group/single
mode selection (Gr. /Sngl)
The ON/OFF switch of
mixing is chosen.
Condition delay cut
switch
Condition delay setting
Ailerons, flaps
and elevators rate
adjustment
● Mixing curve setting
(For a description of the
setting method, see the
description at the back
of this manual.)
136
< Model menu (Airplane/Glider/Multicopter Functions) >
[Corresponding model type]: Airplane/glider, 2 ailerons or more
adjustments can be made by changing the
be set.
Currently selected condition name
Servo speed setting
(For a description of the
setting method, see the
description at the back
of this manual.)
Overall adjustment by
Rate A and Rate B.