First, the set of a reference is required.
Setting a "too far" alarm distance
≧
*When the screen is tapped for one second, the rate is reset to
the initial value.
*Positioning time of GPS
take several minutes. Please do not move the
model during this process. During acquisition,
after the satellite's signals have been acquired,
signal strength display on the transmitter will
show three bars.
Moving the model before the satellites are fully
acquired will cause a delay in acquiring the
satellite signal.
Setting a "too close" alarm distance
t
*When the screen is tapped for one second, the rate is reset to
the initial value.
Telemetry
Data
≧
< Linkage menu >
t
107