FUTABA 16SZ Instruction Manual page 147

5CH → Gyro
Rate ACT
1 OFF/ON
2 INH
3 ON/OFF
*Set so that Rate 1 is turned on at the back position of switch E
and Rate 3 is turned ON at the front position. Since switch E is
turned OFF at the center, Rate 2 remains [INH].
AVCS
GAIN 0％
NORMAL
When AVCS is used we
recommend that the
sensitivity CH be set to
the 3-position.
148 ＜ Model menu (Airplane/Glider/Multicopter Functions) ＞
7CH → Gyro2 8CH → Gyro3
Type Switch
GY SE
GY SE
R7008SB
S.BUS2 port
Gyro Gyro ２
AVCS : 60% AVCS : 60%
Normal : 60% Normal : 60%
GYA441
Aileron servo
GYA441
Elevator servo
Rudder servo
GYA440
: at
Control and Trim → "--"
Gyro ３
AVCS : 60%
Normal : 60%