Table of Contents
Advertisement
1M23N32906
This software updates or alters the functions and features noted below. The instructions and information that follow are meant as a
supplement to the original instruction manual that accompanied the T16SZ transmitter. Please refer to the original instruction manual where
applicable, but replace the steps indicated below with these instructions. Please check to ensure that the update has been installed.
1) Select the System Menu.
2) Touch the [Information] button.
3) Confirm that the information in the display indicates the version numbers as noted above.
1. Telemetry display (The extension of
the number of telemetry data which is
shown)
The number of telemetr y data shown on the
Telemetry display screen is extended. It is 16 items
(4 pages) maximum.
Sensor type selection screen
You can choose which type of sensor to display.
Tap the sensor type.
If you do not want to display telemetry data
on the telemetry monitor screen, select "---".
T16SZ SOFTWARE UPDATE CHANGES
V3.1
Sensor selection screen
For some sensor types, you can choose the
display item. Tap to select.
2. Timer Alarm
Added a setting to continue the alarm after the
alarm set time.
3. Model select
Model data of FX-32 can be used.
4. Data Converter
FX-30 and T12FG have been added to the data
converter compatible models.
The transmitter name is displayed on icon.
5. Butterfly Elevator setting (Glider)
Added fine tuning function to butterfly elevator setting.
Constant: The alarm does not stop
One time: Stop the alarm at once
Advertisement
Table of Contents
