Telemetry: Receiver [Battery]
In this screen, the battery voltage of a receiver is
displayed.
If it becomes higher or lower than the settin, an
alarm and/or vibration will alert you.
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↓ The "down" arrow
will indicate that an
alarm will sound when
the voltage drops to
below the setting.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
Alarm set
*When the screen is tapped for one second, the rate is reset
to the initial value.
< Linkage menu >
96
*Only receiver voltage and EXT voltage can be used in
functions.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
Receiver battery
voltage
Sets the voltage on
which the alarm
operates.