Telemetry: Voltage [Ext. battery]
In this screen, the EXT battery voltage is
displayed.
In order to use this function, it is
⇔
⇔
battery connected to two lines is displayed on EXT-
VOLT.
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↓ The "down" arrow
will indicate that an
alarm will sound when
the voltage drops to
below the setting.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
Alarm set
*When the screen is tapped for one second, the rate is reset to
the initial value.
*SBS-01V must be installed in the aircraft.
*Only receiver voltage and EXT voltage can be used in
functions.
t
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
Ext. battery
voltage
Sets the voltage on
which the alarm
operates.
"Vibrator" type
< Linkage menu >
105