Table of Contents
Advertisement
Telemetry : Current sensor [Current]
drive battery all at the same time.
Max. and min. values
since the power
was turned ON will
display.
◆ Alarm setting
↑ An upward arrow
indicates the alarm
will sound when the
current reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
current reaches below
your set value.
Allows Speech to be
turned ON or OFF.
＜ Linkage menu ＞
112
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
*Current sensor must be installed in the
aircraft.
Tapping this will take you to
the settings screen for the
current alarm
Tapping this will take you to
the settings screen for the
voltage alarm
Tapping this will take you to
the settings screen for the
consumption capacity alarm
The consumption capacity is indicated.
It isn't the present battery capacity.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
Sets the current on
which the alarm
operates.
Advertisement
Table of Contents
