Table of Contents
Advertisement
Throttle curve / Throttle Hover trim
This function adjusts the throttle operation curve
for each condition for optimum engine speed to
throttle stick movement.
Up to 17 curve points can be set for the point
curve type. However, when the 5 points and other
● Mixing curve setting
*For a description of the
curve setting method,
s e e t h e b a c k o f t h i s
manual.
Throttle hover trim
operating position
(White line)
Setting method
158
＜ Model Menu (Helicopter Functions) ＞
point data is used, a simple curve can be easily
created by reducing the number of input points of
the curve to 5 and entering the specified value at
the corresponding points.
Currently selected condition name
Operation precautions
WARNING
When actually starting the engine and
flying, always set the idle up condition
switch to OFF and start the engine in
the idling mode.
P o i n t c u r v e t y p e i s 9
points (initial), but for
simple use, 4~5 points
are sufficient.
Advertisement
Table of Contents
