*When [rpm] mode is selected above setting, the display
mode can be selected.
* There is no change in the transmitter output even when the
"Mode" is changed. Calibration should be performed via the
governor.
* In order to use the Governor function of the T16SZ, it is
necessary to change the settings on the governor for the low
side 700 rpm mode.
The chart below indicates the
m o d e p e r c e n t a g e a n d t h e
corresponding RPM.
1500rpm
1000rpm
700rpm
0%
50% : neutral
main rotor R.P.M. setting channel travel
*For a description of the switch selection method, see the
description at the back of this manual.
*When the screen is tapped for one second, the sensitivity is
reset to the initial value.
3900rpm
3500rpm
2700rpm
2500rpm
2100rpm
2000rpm
100% 110%
< Model Menu (Helicopter Functions) >
169