FUTABA 16SZ Instruction Manual page 97

Telemetry : Temperature
Temperature is a screen which displays/sets
up the temperature information from an optional
temperature sensor.
If it becomes higher or lower than the setting, an
alarm and/or vibration will alert you.
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
w i l l s h o w t h a t a n
alarm will sound when
the temperature rises
above the set value.
↓ A downward arrow
w i l l s h o w t h a t a n
alarm will sound when
the temperature drops
below the set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
Alert set : Temperature warning
℃
℃
≧
*When the screen is tapped for one second, the rate is reset
to the initial value.
＜ Linkage menu ＞
98
*A temperature sensor must be installed in the aircraft.
t
℃
℃ ℃
*Only receiver voltage and EXT voltage can be used in
functions.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
Temperature
Sets the temperature
on which the alarm
operates.