Processor Installation; Figure 19. Pin 1 Indicator Of Processor Carrier Clip; Figure 20. Socket Protective Cover Removal - Intel M50FCP2UR Integration And Service Manual

Intel® Server System M50FCP2UR System Integration and Service Guide
8. Align Pin 1 indicator of processor carrier clip with the corner cut-out on the heat sink.
Note: In a standard 2U or 1U heat sink there are two cut-out corners, either can be used to align Pin 1
indicators.
9. Gently press down the heat sink onto the processor carrier clip until it clicks into place.
10. Ensure that all four heat sink corners are securely latched to the tabs on the processor carrier clip.
2.4.2

Processor Installation

Caution: Do not touch the socket pins. The pins inside the processor socket are extremely sensitive. A
damaged processor socket may produce unpredictable system errors.
1. (If present) Remove the processor socket cover by squeezing the finger grips (see Letter A) and
pulling the cover up from the processor socket (see Letter B.)
Caution: Ensure that the processor socket is free of damage or contamination before installing the PHM. If
debris is observed, blow it away gently with an air blower. Do not use tweezers or any other hard tools to
remove it manually.
30

Figure 19. Pin 1 Indicator of Processor Carrier Clip

Figure 20. Socket Protective Cover Removal