Table of Contents
Advertisement
Intel
®
Server System R1000WT Product Family System Integration and Service Guide
CAUTION: The pins inside the processor socket are extremely sensitive. Other than the processor, no object
should make contact with the pins inside the processor socket. A damaged processor socket pin will render
the socket inoperable, and will produce erroneous processor or other system errors if used.
NOTE: The underside of the processor has components that may damage the socket pins if installed improperly. The
Processor must align correctly with the socket opening before installation. DO NOT DROP processor into the socket!
NOTE: When possible, a processor insertion tool should be used when placing the processor into the processor socket.
Remove processor from its packaging. If present, carefully remove the protective cover from the bottom side of
the processor, taking care not to touch any processor contacts (see letter 'A'). Orient the processor with the socket
so that the processor cutouts match the four orientation posts on the socket (see letter 'B'). Note the location of
the gold key on the corner of processor (see letter 'C'). Carefully place (Do NOT drop) the processor into the
socket.
•
Remove the plastic processor socket cover.
Remove the socket cover by pressing it out of the load plate. If attached, the black mylar spacer does not
have to be de-attached from the plastic socket cover.
NOTE: The plastic processor socket cover and mylar spacer should be saved and re-used should the processor
need to be removed at anytime in the future.
•
Close the Load Plate.
Rev 2.2
Figure 28. Processor Installation – Install the Processor
Figure 29. Processor Installation – Remove the Socket Cover
21
Advertisement
Table of Contents
