Table of Contents
Advertisement
Intel® Server System M50FCP2UR System Integration and Service Guide
7. Using two (2) screws, secure the SSD to the carrier side rail (see Letter G). Tighten to 8 in-lb.
3.6.2.4
3.5" Drive Carrier Installation
1. Align the drive carrier with the open drive bay.
2. With the lever in the open position, insert the drive carrier into the drive bay (see Letter A).
3. Push forward until the drive is fully seated with the backplane.
4. Close the drive assembly lever until it locks in place (see Letter B).
3.7
OCP* 3.0 Network Adapter Installation
This section provides instructions for the installation of an OCP* 3.0 add-in card. OCP add-in cards will have
one of two possible methods to secure the card within the OCP bay. Refer to the sub-section that supports
the card to be installed.
50
Figure 53. Fasten 2.5" SSD Bracket to Drive Carrier
Figure 54. 3.5" Drive Carrier Installation
Advertisement
Table of Contents
