Processor Heat Sink Installation; Figure 49. Installing The Processor Heat Sink - Intel S9200WK Series Setup And Service Manual

Intel® Server System S9200WK Product Family Setup and Service Guide
• No excess cleaning agent should flow from the top side of the processor onto any part of the server
board
4.9.2

Processor Heat Sink Installation

Note: Replacement processor heat sinks will include thermal interface material (TIM) on the bottom side of
the heat sink. If present, remove the protective film from the TIM before installing the heat sink onto the
processor.
1. Align and place the heat sink on top of the processor. No specific heat sink fin orientation is required.
2. Secure the screws indicated in Figure 49 with a Torx* T-20 screwdriver using 8 lbs. of torque, in an X
pattern, alternating between screws until all are tight.
48

Figure 49. Installing the processor heat sink