System Cable Routing; Figure 27. System Cable Routing Channels - Intel M50FCP2UR Integration And Service Manual

Intel® Server System M50FCP2UR System Integration and Service Guide
3.3

System Cable Routing

The system includes a system fan assembly that holds the system fans. The system fan assembly is modular
and must be removed from the system (see Section 3.4) to route internal cables between the back and front
of the system, and between the onboard PCIe MCIO connectors on the server board to the backplanes.
All internal cables routed between the back and the front of the system, must use the cable channels located
along the right and left chassis sidewalls. (See Figure 27).
Cables connected between the onboard PCIe MCIO connectors and the backplanes behind the front drive
bay are routed underneath the system fan assembly and through the included cable management clips. (See
Figure 27).
No cables should be routed between the memory modules and processors
Note: The system fan assembly must be removed from the chassis before routing any internal cables.

Figure 27. System Cable Routing Channels

36