Processor Installation / Removal; Figure 32. 1U Heat Sinks; Figure 33. 1U Heat Sinks Installed In Module - Intel D40AMP Series Integration And Service Manual

Intel® Server D40AMP Family Integration and Service Guide
3.5

Processor Installation / Removal

The Intel® Server D40AMP Family designed for 1U height heat sinks as shown in the following figures.
There are two types of 1U heat sinks – front heat sink and back heat sink. The front heat sink is used for
CPU0, and the back heat sink is used for CPU1. The exploded views in the following figure show the
difference. The front heat sink has more heat dissipating fins.
Important: Front and back heat sinks are not interchangeable. The previous descriptions must be followed.

Figure 32. 1U Heat Sinks

The following figure displays a module with 1U front and back heat sinks installed.

Figure 33. 1U Heat Sinks Installed in Module

A processor heat sink module (PHM) assembly and processor socket assembly (or "loading mechanism") are
necessary to install a processor onto the server board. The following figure identifies each component
associated with the PHM and processor socket assemblies.
36