Intel® Server System M50FCP2UR System Integration and Service Guide
Figure 51. 3.5" Drive Carrier to 2.5" SSD Bracket–Tab Removal and Mount SSD to Bracket
2. Break off the small side tab from the side of the drive blank, making the drive blank into a 2.5" drive
mounting bracket (see Letter A).
Note: Once the side tab is removed, it cannot be re-attached to the drive blank.
3. Mount and secure a 2.5" SSD to the drive bracket using two screws at the locations shown in the
figure (see Letter B). Tighten to 8 in-lb.
Figure 52. 2.5" SSD Bracket Installation into Drive Carrier
4. Align and position the mounting holes on the left side of the drive bracket over the mounting tabs on
the drive carrier side rail (see Letter E).
5. Lower the other side of the drive into the carrier and press down until all mounting tabs lock in place
(see Letter F).
6. Turn the drive assembly over.
49