Figure 87. System Top Cover Panel Shipping Screws; Figure 88. System Top Cover Removal - Intel M50FCP2UR Integration And Service Manual

Intel® Server System M50FCP2UR System Integration and Service Guide
The system may have the top cover panels fastened to the chassis. If present, a total of four screws, one on
each side of the front cover and one on each side of the back cover, need to be removed to detach each top
cover panel from the chassis.
Note: A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on the work surface.
For each top cover panel:
1. While pushing down on both the left and right buttons of the given top panel (see Letter A), slide the
top cover panel towards the front (front panel) or back (back panel) of the chassis (see Letter B).
2. Carefully lift the top cover panel up and away from the chassis.
Note: Each top cover panel can slide along the chassis base for 10 mm and then needs to be lifted.

Figure 87. System Top Cover Panel Shipping Screws

Figure 88. System Top Cover Removal

71