Intel MFSYS25 Install Manual
Hide thumbs
Also See for MFSYS25:
- User manual (212 pages) ,
- Connection manual (30 pages) ,
- Specification (59 pages)
Related Manuals for Intel MFSYS25
Summary of Contents for Intel MFSYS25
- Page 1 Rail Kit Install Guide: Intel® Modular Server System MFSYS25 ® A Guide for Technically Qualified Assemblers of Intel Identified Subassemblies/ Products Intel Order Number: E12567-002...
- Page 2 Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of the Intel product could create a situation where personal injury or death may occur.
-
Page 3: Safety Information
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the ® Intel Server Deployment Toolkit CD and/or at http://support.intel.com/support/... -
Page 4: Warnings
Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. Rail Kit Install Guide: Intel® Modular Server System MFSYS25... -
Page 5: Table Of Contents
Rail Kit Install Guide ....................1 Kit Contents ........................... 1 Rail Kit Installation Instructions ....................1 Prepare System .......................... 1 Prepare Rack ..........................2 Install System in Rack ........................ 7 Complete Setup .......................... 7 Rail Kit Install Guide: Intel® Modular Server System MFSYS25... - Page 6 Rail Kit Install Guide: Intel® Modular Server System MFSYS25...
-
Page 7: Rail Kit Install Guide
Rail Kit Install Guide The Intel® Modular Server System MFSYS25 is designed to support cabinets that are 19 inches (483 mm) wide by up to 36 inches (914 mm) deep. A set of rack mounting rails is provided in this kit and will accommodate either square or round hole rack-mounting methods. -
Page 8: Prepare Rack
Round Square This side for rack with This side for Round Mounting rack with Holes Square Mounting Holes AF002462 Figure 1. Pictorial View of Multi-pin Adapter Rail Kit Install Guide: Intel® Modular Server System MFSYS25... - Page 9 (see letter “B”) while extracting the middle and bottom pins from the multi-pin bracket. AF002463 Figure 2. Removing Multi-pin Adapter from Multi-pin Bracket 6. Set the multi-pin adapter for round mounting holes (see Figure 1). Rail Kit Install Guide: Intel® Modular Server System MFSYS25...
- Page 10 Use the swivel lock to lock the multi-pin adapter in place (see letter “C”). AF002464 Figure 3. Setting Multi-pin Adapter in Multi-pin Bracket 8. Repeat the previous three steps for both ends of each rack rail. Rail Kit Install Guide: Intel® Modular Server System MFSYS25...
- Page 11 At the rear of the rack rail, press and hold the top (floating) pin downward while pushing the rack rail and adapter into the rack upright holes. Rail Kit Install Guide: Intel® Modular Server System MFSYS25...
- Page 12 Ensure the rack rail is level. 13. Repeat Steps 10-12 for the right rack rail, ensuring that it is parallel and level with the left rack rail. Rail Kit Install Guide: Intel® Modular Server System MFSYS25...
-
Page 13: Install System In Rack
These captive fasteners also engage the rails. AF002467 Figure 6. Tightening Captive Fasteners Complete Setup 17. Re-install all modules and controllers that were removed. 18. Reconnect all peripheral devices and the power cord(s). Power up the system. Rail Kit Install Guide: Intel® Modular Server System MFSYS25... - Page 14 Rail Kit Install Guide: Intel® Modular Server System MFSYS25...