4.5.4 Event
This section provides guidance on configuring alarm, and abnormality.
4.5.4.1 Alarm
4.5.4.1.1 Relay Activation
You can set several parameters of relay activation such as relay-in, period, anti-dither, and sensor
type. When triggering alarm, the system sends the alarm signal to external devices to trigger, for
example, buzz.
Step 1
Select Setting > Event > Alarm > Relay Activation.
Step 2
Select On checkbox to enable alarm input for the current channel.
Step 3
Select alarm input channel.
Step 4
Set the period of alarm input.
1) Click Setting.
Figure 4-69 Relay activation
Figure 4-70 Period
62
User's Manual