Table of Contents
Advertisement
Parameter
Clear
Delete
Step 3
Click Confirm.
4.5.3 Network
You can set IP address, port, and other parameters.
4.5.3.1 TCP/IP
Configure the IP address of the Camera, and DNS server so that the Camera can connect with other
devices in the network.
Some models support dual network port. Do not set them in the same network segment; otherwise
it might cause network error.
Select Setting > Network > TCP/IP.
Step 1
Step 2
Configure parameters.
Parameter
Host Name
Ethernet Card
Description
Delete all the configured regions.
Delete the latest ROI. You can click it for several times. Right-click any position
in the image to realize the same effect.
Figure 4-62 TCP/IP
Table 4-30 TCP/IP parameter description
Description
Enter a name (Maximum 15 characters) for the host device.
Select the Ethernet card. The default setting is Wire.
55
User's Manual
Advertisement
Table of Contents
