Table of Contents
Advertisement
Parameter
Mode
MAC Address
IP Version
IP Address
Subnet Mask
Default
Gateway
Preferred DNS
Alternate DNS
Click Confirm.
Step 3
4.5.3.2 Connection
4.5.3.2.1 Port
You can set the maximum number, and value of the ports.
Step 1
Select Setting > Network > Connection > Port.
Step 2
Configure each port value of the Camera.
Parameter
Max Connection
TCP Port
UDP Port
Description
Network mode, including static, and DHCP.
● Static: Manually set IP, subnet mask, and gateway.
● DHCP: Automatically acquire IP. At this moment, IP, subnet mask, and
gateway cannot be set.
MAC address of the host.
Includes IPv4, and IPv6. The IP address of both versions can be accessed.
Device IP Address.
The corresponding subnet mask of device IP address.
Corresponding gateway of device IP address.
IP address of DNS server.
Alternative IP address of DNS server.
Figure 4-63 Port
Table 4-31 Connection parameters description
Description
The maximum number of clients (such as web client, and platform client)
that are allowed to access the Camera simultaneously. It is 10 by default.
Protocol communication port. It is 37777 by default.
User data packet protocol port. It is 37778 by default.
56
User's Manual
Advertisement
Table of Contents
