Table of Contents
Advertisement
Step 3
Configure parameters.
Parameter
Username
Password
Confirm Password
Group Name
Memo
Operation
Permission
Restricted Login
Step 4
Click Save.
Step 5
Select Setting > System > Account > Account > Group Name.
You have two groups named admin, and user by default, you can add new group, delete
added group or modify group authority, and memo.
Figure 4-81 Add user
Table 4-42 Add user parameters description
Description
Username It can only consist of number, letter, underline, and hyphen, the
maximum length contains 15 characters, and it cannot be the same as the
existed username.
User's password, and confirm password.
● The password can be set from 8 characters to 32 nonblank characters,
and contains at least two categories from upper cases, lower cases,
numbers, and special characters (excluding "'", """, ";", ":", and "&")
● Follow the password security prompt to set a high security level
password.
● Password should be the same as Confirm Password.
Select the group to which new users belong. Each group has different
authorities.
Remarks of the user.
Select the permissions that you want assign to the user.
Set the IP address that is restricted to log in, and the restriction time.
71
User's Manual
Advertisement
Table of Contents
