Table of Contents
Advertisement
Step 3
Configure parameters.
Parameter
Address
Port
Sub-Device ID
4.5.3.4 SMTP (Email)
Configure the email, and when alarms or abnormal events are triggered, an email will be sent to the
recipient server through SMTP server. The recipient can log in to the incoming mail server to receive
emails.
After enabling this function, system will send the device data to the given server. There is data
leakage risk.
Step 1
Select Setting > Network > SMTP (Email).
Figure 4-65 Auto register
Table 4-32 Auto register parameter description
Description
The IP address of the server on which the device register.
The port of the server for auto registration.
The device ID distributed by the server for auto registration. Make sure
that the ID is unique during auto registration.
58
User's Manual
Advertisement
Table of Contents
