Table of Contents
Advertisement
Icons
Name
ANPR Receive
Record Type
Talk
Manual
Snapshot
Digital Zoom
Video
Recording
Config (LPR)
Click
.
Table 4-6 General function description
Description
Select the check box, and the Camera automatically receives
vehicle snapshots, and detects event information triggered
by sources such as radar or video detection, and displays such
snapshots, and information at the lower part of the page.
The snapshots are saved in the storage path defined by
Setting > Storage > Destination > Save Path.
Select the format of video recordings (dav by default).
Click Talk, and you can communicate with people on site
through the camera.
Click to take a snapshot when a vehicle passes. The snapshot
is saved in the storage path.
● Enable ANPR Receive first.
● To change the storage path of snapshots, go to Setting >
Storage > Destination > Save Path.
Drag to select any area in the video window, and then the
area will be zoomed in. In any area of the video window, click
or right-click to exit.
Click it to start recording. Click
You can set the storage path of video recordings from
Setting > Storage > Destination > Save Path.
You can draw the area of plate detection, adjust camera's
focal length, and set applicable region.
Figure 4-22 Config (LPR)
23
User's Manual
again to stop recording.
Advertisement
Table of Contents
