Table of Contents
Advertisement
Parameter
Sub Stream
Step 3
Click Confirm.
4.5.2.2.2 Snapshot
You can set the picture stream, including resolution, quality or picture size.
Step 1
Select Setting > Camera > Video > Snapshot.
Step 2
Configure parameters.
Parameter
Snapshot Type
Resolution
Description
The value is the upper limit of the stream in VBR mode
Bit Rate
while it is fixed in CBR mode.
Frame or time interval between two I frames. The
bigger the interval, the smaller space taken by the
I Frame Interval
decompressed video. The system default is set twice as
big as frame rate.
You can view if the video is tampered through
verifying watermark character.
● Select Watermark Settings, and enable the
Watermark
Settings
● Watermark Character is DigitalCCTV by default.
● The watermark character can only consist of
Enable
Select it, and enable sub stream.
Image quality can be set in VBR mode. There are 6
Quality
levels optional.
The value is the upper limit of the stream in VBR mode
Max Bit Rate
while it is fixed in CBR mode.
Figure 4-60 Snapshot
Table 4-28 Snapshot parameters description
Description
Currently it only supports general snapshot.
The snapshot resolution.
53
function.
number, letter, underline, and maximum length
contains 85 characters.
User's Manual
Advertisement
Table of Contents
