Step 3
Click Watermark,and the system displays verify progress, normal watermark, and some
other information.
The page of Watermark Verification Completed appears after verification.
4.4.3 Capture Record Search
Search for the vehicle record within the defined period, and according to the defined direction.
● It supports max 10,000 records or 1,024 records respectively when the Camera is installed with or
without TF card.
● If the passing vehicle records are unreadable in Excel after being imported, change them into
UTF-8 encoding document in txt, and then they can be opened normally.
Step 1
Select Query > Capture Record Search.
Step 2
Set Begin Time, and End Time, and then set the Direction (vehicle movement direction,
including Approaching, Departing, and Unknown).
Step 3
Click Search to search for the plates that meet the search conditions.
Step 4
Click Export, and then select storage path to export the results to PC.
4.4.4 Alarm Output Search
Set the search conditions to search alarm output.
Make sure that all the external devices are connected with the Camera through RS-485 port.
Step 1
Select Query > Alarm Output Search.
Step 2
Set the start time and end Time.
Step 3
Click Search.
Figure 4-28 Capture record search
29
User's Manual