Table of Contents
Advertisement
Parameter
Mode
Shutter
Shutter Scope
Gain Scope
WB
Mode
Step 3
Click Save.
4.5.2.1.3 Metering Zone
This section provides guidance on setting the measure mode of metering zone.
Select Setting > Camera > Attribute > Metering Zone.
Step 1
Step 2
Configure parameters.
Parameter
Plate Light
Backlight
Frontlight
Description
Select the way of adjusting exposure mode. You can select from
Manual, and Auto.
You need to set shutter when set Mode to Manual.
Set the time range of shutter.
You need to set shutter when Customized Range is set as Shutter.
Set the value range of gain.
You need to set gain scope when set Mode to Manual.
Set scene mode to adjust the image to its best status.
Figure 4-58 Metering Zone
Table 4-26 Metering zone parameter description
Description
When selecting Enable, you can turn ON or OFF backlight, and frontlight
according to scene requirement, and then improve the backlight image
brightness.
51
User's Manual
Advertisement
Table of Contents
