Table of Contents
Advertisement
Step 3
Configure parameters.
Parameter
Insert Before
Insert After
Edit
Delete
Clear
Step 4
Click Confirm.
4.5.1.8.2 Volume/Encoding
Configure the volume of voice broadcast.
Step 1
Select Setting > ITC > Voice Broadcast > Volume/Encoding.
Step 2
Configure the input volume, output volume, and speaking speed as needed.
Step 3
Click Confirm.
4.5.1.9 Device Test
4.5.1.9.1 Device Test
You can test the barrier opening, and closing, capture, display content, voice broadcast, and
abnormal configuration modules to see if they work as configured. You can also export related
Table 4-22 Broadcast content parameters description
Description
Insert an option before the selected one on the display area.
Insert an option after the selected one on the display area.
Click
next to the broadcast option to edit the prefix, and suffix of the
option.
Click
next to the broadcast option to delete the option.
Delete all broadcast options.
Figure 4-53 Volume/Encoding
46
User's Manual
Advertisement
Table of Contents
