Client; Save Path - Dahua Technology DHI-ITC237-PW6M-LZF1050 User Manual

Parameter
Encode Type
Port
Username
Password
Upload Type
Click Confirm.
Step 3

4.5.5.4 Client

You can set the parameters of storing to client.
Select Setting > Storage > Destination > Client.
Step 1
Step 2 Configure parameters.
Parameter
Offline Transfer
Type
Server
Server IP
Click Confirm.
Step 3

4.5.5.5 Save Path

This section provides guidance on configuring picture, record naming, and storage path.
Description
Refers to the encode mode of Chinese characters when naming pictures.
Two modes are available: UTF-8, and GB2312. After configuring Server IP,
and Port, click test to check whether the FTP server works.
The port number of FTP server.
The username, and password of FTP server.
Select event(s), and picture type(s) to be uploaded to the FTP server.
Figure 4-76 Client
Table 4-39 Client configuration parameter description
Description
When network is disconnected or failed, you can store the picture into
local storage card, and it will automatically upload to platform server after
network resumes.
Select connection type with platform server.
● IP: Connect to platform server through IP address.
● MAC: Connect to platform server through MAC address.
Select server, which includes Server1, and Server2.
● When the type is selected as IP, you need to fill in IP address of the
server.
● When the type is selected as MAC, you need to fill in MAC address of
the server.
67
User's Manual