Table of Contents
Advertisement
Parameter
Illumination
Intensity
when
Vehicles Pass
Step 3
Click Confirm.
4.5.2.1.2 Shutter
This section provides guidance on configuring camera shutter, including shutter mode, exposure
mode, gain mode, and scene mode.
Step 1
Select Setting > Camera > Attribute > Shutter.
Step 2
Configure parameters.
Parameter
3D NR
Video Tridim Denoise
Video Spatial
Video Temporal
Picture
Scene
Sharpness
WDR
Exposure
Iris Adjust Mode
Description
Set the illumination intensity when there are vehicles passing.
Figure 4-57 Shutter
Table 4-25 Shutter parameters description
Description
When it is On, 3D NR is enabled to reduce noise of video.
Spatial video denoising. The higher the value, the fewer the noise.
Temporal video denoising. The higher the value, the fewer the flicker
noise.
You can change the scene, and adjust the sharpness of corresponding
scene. Scenes available: Dawn/Dusk, Daytime, and Night.
You can set the sharpness of corresponding scene.
The higher the value, the clearer the image. But there will be noise if
sharpness is too high.
Select On to enable WDR (wide dynamic range), which helps provide
clear video images in bright, and dark light.
Select the iris adjust mode from Off, and Auto.
50
User's Manual
Advertisement
Table of Contents
