Table of Contents
Advertisement
Parameter
Lost 1 Character at The Ends
Redundant 1 Character at
the Ends
Tolerant Matching
(Character)
Equivalent matching
Characters
Step 3
Click Confirm.
4.5.1.5.2 Allowlist
You can search, and check whether a plate number is included in the allowlist, or you can import or
export plate number in the allowlist.
Step 1
Select Setting > ITC > Blocklist and Allowlist > Allowlist.
Step 2
Configure parameters.
● Plate No.: Enter the plate number (enter some characters). Click Search, and check
whether the plate number exists in the allowlist.
● Edit plate information: Click
the plate number.
● Delete single plate number: Click
delete it from the allowlist.
● Delete plate number in batches: click Clear All, and then click Confirm in the dialog
box to delete all the allowlist information.
● Adding vehicles to allowlist one by one:
1) Click Add.
Table 4-17 Allowlist parameters description
Description
Plate number will be matched when the first or last character of
the detected plate is missing.
Plate number will be matched when one more character is
detected before the first character or after the last character of
the plate.
Set the tolerant matching value (0, 1, or 2), and plate number
will be matched successfully when 0, 1, or 2 characters different
from the recorded plate number are detected.
Click
to add the fuzzy match condition. For example, if o is
detected by the Camera, the character will be automatically
recognized as 0, as shown in the figure above.
Figure 4-43 Allowlist
of the corresponding plate number searched, and edit
of the corresponding plate number searched, and
39
User's Manual
Advertisement
Table of Contents
