Table of Contents
Advertisement
Parameter
Health Mail
Test
Step 3
Click Save.
4.5.3.5 IEEE802
Step 1
Select Setting > Network > IEEE802.
Step 2
Select On check box to enable IEEE802, and then configure parameters.
Parameter
Authentication
CA Certificate
PEAP
Username
Password
EAP-TLS
Client Certificate
Private Key
Click Confirm.
Step 3
Description
The system sends test mail to check whether the connection succeeds.
Select the Health Mail check box, and configure the Update Period, and
then the system sends test mails according to the defined period.
Test whether the email function is normal. If the configuration is correct,
the email address of the receiver will receive the test email. Save the
email configuration before running rest.
Figure 4-67 IEEE802
Table 4-34 IEEE802 parameters description
Description
● PEAP: Ordinarily uses TLS only to authenticate the server to the client,
and only the sever is required to have a public key certificate.
● EAP-TLS: Provides mutual authentication of client to server, and
server to client. Both the client, and the server must be assigned a
digital certificate signed by a CA (Certificate Authority) that they both
trust.
Select CA Certificate check box, and then click Browse to import the CA
certificate to verify whether the switch is valid.
For PEAP method, user authentication is performed by using
password-based credentials (username, and password).
Click Browse to import the client certificate, and private key files for
authentication.
60
User's Manual
Advertisement
Table of Contents
