Table of Contents
Advertisement
4.5.5.3 FTP
FTP function can be enabled only when it is selected as destination path. When the network does
not work, you can save all the files to the internal SD card for emergency.
You can set picture name, and storage path. Click Help... to view naming rule.
Select Setting > Storage > Destination > FTP.
Step 1
Step 2
Configure parameters.
Parameter
Offline Transfer
FTP Named
On
Protocol
Server IP
Figure 4-75 FTP
Table 4-38 FTP configuration parameter description
Description
When the network disconnects or fails, snapshots will be stored in TF card.
After the network is restored, the snapshots will be uploaded from the TF
card to FTP or client.
Make sure that TF card is inserted in the Camera; otherwise, the offline
transfer function cannot be enabled.
Set the naming rule of snapshots to be saved in FTP server. You can click
Help... to view the Picture Naming Help, or click Restore to restore the
default naming rule.
Enable FTP server storage.
● SFTP (Recommended): Secure File Transfer Protocol, a network
protocol allows file access, and transfer over a secure data stream.
● FTP: File Transfer Protocol, a network protocol implemented to
exchange files over a TCP/IP network. Anonymous user access is also
available through an FTP server.
The IP address of FTP server.
66
User's Manual
Advertisement
Table of Contents
