Table of Contents
Advertisement
Parameter
Measure Mode
Step 3
Click Confirm.
4.5.2.2 Video
4.5.2.2.1 Video
You can set the camera stream information.
Step 1
Select Setting > Camera > Video > Video.
Step 2
Configure parameters.
Parameter
Main Stream
Description
● Global Measure: Measure the brightness of the whole image area, and
intelligently adjust the overall image brightness.
● Partial Measure: Measure the brightness of sensitive area, and
intelligently adjust the overall image brightness. If the measured area
becomes bright, then the whole area becomes dark, and vice versa.
Drag to select the measured area, and the system displays yellow box. Drag
the box to proper location, and then click Confirmto complete configuration.
Figure 4-59 Video
Table 4-27 Video parameters description
Description
Stream Type
Currently it supports normal stream.
Currently it only supports H.264B, H.264M, H.264H,
Encode Mode
H.265, and MJPEG.
Select the resolution of the video.
Resolution
The resolution of sub stream cannot be greater than
main stream.
Frame Rate(FPS)
Select frame rate as needed.
Include VBR, and CBR.
Bit Rate Type
Image quality can only be set in VBR mode.
52
User's Manual
Advertisement
Table of Contents
