Dahua Technology DHI-ITC237-PW6M-LZF1050 User Manual page 52

Parameter
Data Bit
Stop Bit
Baud Rate
Check
2) RS-485 transparent transmission.
The third party platform can control the RS-485 output of the Camera through RS-485
transparent transmission, and then you can connect external devices.
Trigger capture through transmitting capture command. To test the RS-485 transparent
transmission sending, and receiving conditions, select Hexadecimal Sending, and
then click Open on the right side of Receiving Area.
Figure 4-49 RS-485 transparent transmission
3) Serial port push.
You can configure the serial port push information. The camera pushes the snapshots
to the third serial collection device through RS-485.
Table 4-20 Serial port push parameter description
Parameter
Field Name
Quick
configuration
Format
Table 4-19 DHRS parameters description
Description
8 by default, and cannot change.
1 by default, and cannot change.
The transmission speed of the code element. Options are 4800,
9600, 19200, 38400, 115200.
None by default, and cannot change.
Figure 4-50 Serial port push
Description
Select fields to send to the third serial collection device.
Hover over the fields, you can see the explanations.
Select the check box next to Field Name to select all the
fields.
Format of the fields.
43
User's Manual