Table of Contents
Advertisement
Parameter
System Time
Sync PC
DST
NTP Setting
NTP Server
Port
Time Zone
Interval
Step 3
Click Confirm.
4.5.6.2 Account
4.5.6.2.1 Account
The system supports configuring operation user of web. You need to configure user group before
configuring user account.
● The user with Account control authority can also change the password of other users.
● It is recommended to give fewer authorities to normal users than premium users to make user
management convenient.
● Cannot delete the user in login status.
You can add, delete or modify user.
Procedure
Select Setting > System > Account > Account > Username.
Step 1
Step 2
Click Add User.
Description
Set current system time of the Camera. It becomes valid immediately
after setting.
Sync the time of the Camera with the time on PC.
Enable the function, and then set begin time, and end time of DST
according to date or week.
Select to enable the function of network time synchronization.
Time server address.
Port number of time server.
The time zone where the Camera is located.
The sync interval between device, and time server.
Figure 4-80 Username
70
User's Manual
Advertisement
Table of Contents
