Table of Contents
Advertisement
4.5.6.4 Default Settings
You can restore the device to default settings or factory defaults.
Select Setting > System > Default, and then select Default or Factory Default as needed.
● Default: Restore your settings to default value. In this case, network IP address information of the
Camera will not restore to default settings.
● Factory Default: Restore the system to factory default settings. In this case, the Camera will
restart, and you need to initialize the Camera before any further operation.
4.5.6.5 Import/Export
Export the system configuration file to back up the system configuration; import system
configuration file to make quick configuration or recover system configuration.
Step 1
Select Setting > System > Import/Export.
Click Import or Export.
Step 2
● Import: Import the local system configuration file to the system.
● Export: Export associated configuration to local, and save as file whose suffix
is .backup.
Step 3
Select the imported file path or exported folder.
Step 4
Click Open or Save, and view import, and export result on the web page.
4.5.6.6 Automatic Maintenance
You can set the time of auto reboot, and automatically delete old files.
Step 1
Select Setting > System > Auto Maintain.
Step 2
Configure parameters.
Figure 4-95 Default settings
Figure 4-96 Import/Export
Figure 4-97 Auto maintain
79
User's Manual
Advertisement
Table of Contents
