Table of Contents
Advertisement
4.5.3.6 ITC Push
You can configure this parameter to push the captured vehicle violations information to the server.
Step 1
Select Setting > Network > ITCPUSH.
Step 2
Configure parameters.
Parameter
On
No Plate Upload
Username
Password
Web URL
Device ID
Http Time Out(s)
Keep Alive Time(s)
Character
Encoding
Upload List Type
Push Picture Config
Upload Info Config
Step 3
Click Save.
Figure 4-68 ITC push configuration
Table 4-35 ITC push parameter description
Description
Select On check box to push passing vehicles information.
Select No Plate Upload check box to push the unlicensed vehicle
information.
Username, and password for logging in to server.
Http URL prefix information of uploaded picture data.
Displays the device ID information.
Time limit (0–65535) of the device requesting access to cloud sites.
Uploading data will fail if the limit is exceeded.
Time period (0–65535) of keeping the device connected with cloud sites
after uploading data. It is 30 s by default.
Encoding mode of the pushed content.
● UTF8: Applicable for all languages
● GB2312: Only applicable for Chinese Simplified.
Select the type of list that you want to upload.
Select the pushed picture type, including Original Image, Plate Picture,
and Vehicle Body Picture.
Select the information that you want to upload.
61
User's Manual
Advertisement
Table of Contents
