Table of Contents
Advertisement
2) Enter complete plate number, and card ID.
3) Set the Begin Time, and End Time of the plate number which exists in allowlist.
The vehicle will be no longer considered as allowlist vehicle beyond the defined time
range.
4) Enter Vehicle Owner Name, and select Gate Mode (barrier gate) from No Authorize
(no permission of auto opening barrier), and Authorize (auto opening barrier) as
needed.
You need to enable barrier control from Setting > ITC > Blocklist and Allowlist >
Barrier Control.
5) Select Continue Adding, click Save, and the system will save allowlist plate number
information, and directly enter the adding page of next allowlist plate.
You can also cancel selecting Continue Adding, and then click Save to stop adding
further vehicles.
● Exporting vehicles to allowlist in batches:
1) Click Export, and it pops up the Encrypt Config dialog box.
2) Check Open (encrypt) or Off (do not encrypt) as needed, and then click Confirm.
Figure 4-45 Encrypt config
3) Select the path of storing files. Click Save, and export allowlist to local in .csv format,
which can be opened in Excel.
● Importing vehicles to allowlist in batches:
Figure 4-44 Add
40
User's Manual
Advertisement
Table of Contents
