Table of Contents
Advertisement
The steps of config (LPR) are shown as follows.
Step 1
Set focus, and zoom mode, which is used to recognize vehicle.
Parameter
Auto Focus
Regional
Manual Focus
Restore All
Step 2
Select, and draw the config line type.
The configured area line, and detection line in Guide are displayed in the video page.
Parameter
Iden Area
Snap Line
Shield Area
Step 3
Draw lines on the view page.
Click Redraw to delete lines one by one.
Step 4
Click Confirm to save the drawn lines.
Step 5
Select Applicable Region from Russian-Speaking Region and Europe. System restarts
after changing the region and all the functions such as plate recognition, alarm trigger and
more apply to the selected area.
Click Confirm.
Step 6
4.3.7 Vehicle Snapshot
Select ANPR Receive, and then snapshots will be displayed when vehicles pass.
Table 4-7 Focus parameter description
Description
Auto adjust camera lens, and make the scenario clearly focused.
Click Regional, and then draw a box in the video image to focus the defined
region in the box.
● Zoom:
Speed: There are totally 3 levels to be selected.
◇
Zoom in, zoom out: Click
◇
directly drag adjustment bar, and set zoom.
● Focus:
Speed: There are totally 3 levels to be selected.
◇
Near, far: Click
◇
place. You can also directly drag adjustment bar to set near, and far
focal length.
Restore all to initialized settings.
Table 4-8 Line parameters description
Description
Click it, and draw the area range which needs to be detected.
The recognition area line is displayed as red box.
Draw the detection line which triggers video capture, it is as functional as the
line in traffic. It will trigger, and take snapshot when the vehicle crosses the
detection line.
Snap line is displayed as green line.
Set the area range which needs to be shielded. LPR is not implemented within
the shielded area. It supports setting max two shielded areas.
Area line is displayed as gray box.
24
to zoom in, click
to focus on far place, click
User's Manual
to zoom out; Or
to focus on near
Advertisement
Table of Contents
